DRILL PRESSES

POWER HAMMER HORIZONTAL BANDSAWS

VERTICAL BANDSAWS

COLD SAWS

BENCH PRESSES

TIRE PRESSES LABORATORY PRESSES BELT GRINDERS TUBE BENDERS

AUTO FEED SYSTEMS

Single Leverage Ratchet Lever Compound Leverage

Hand-Operated Air-Operated Elec-Draulic I Elec-Draulic II Movable Table Utility Hydraulic Dura-Press Manual Dura-Press Single Phase Dura-Press Three Phase

Bench Model Floor Model

Standard Duty Heavy Duty Mitering Dual Mitering Production

14-10 Trademaster Work-A-Matic SXC Industrial

Manual Semi & Auto/Pivot Semi-Automatic/Post Automatic/Post

Air-Operated C-Frame

Hydraulic Tube Bender Manual Tube Bender Tube Notcher

Automatic Stop/Pushing Heavy Duty Manual Stop Manual Stop Roller Conveyor Table

Tube Benders

HYDRAULIC TUBE BENDER

MANUAL TUBE BENDER

TUBE NOTCHER

View All Products


	Models

	HV200 Hydraulic vertical, capacity 2"

Tube Bender -
Hydraulic Vertical

The Dake HV200 Tube Bender is designed to bend 1" to 2" material up to 90-degrees in one operation and is a must for any manufacturing/fabrication shop. The HV200 comes with choice of one of 26 standard heat-treated aluminum dies allowing for effective bending of a variety of material. The 2" die will bend up to .134 wall chrome moly, d.o.m. or electric weld. Special die sets are also available. Separate power unit required. Dake offers two types of power units to operate the HV200, a Manual Hydraulic Pump (model #301121) and an Air/Pneumatic Pump (model #302252) which requires 60-100 psi and 9 cfm.
Model HV200 shown.

	FEATURES
	AVAILABLE DIES

Get Flash

Click the image or options above to zoom.

Free Shipping!


Available Dies

				Minimum Allowable
	Dake Part #			Wall Thickness for
	Includes			Wrinkle Free Bends**
	Follow Bar,			Hydraulic	Manual
	Hook & Pin	Radius	Size	Benders	Benders
	302357	4 inch	3/4" Tubing
	302358	4 inch	1" Tubing	0.058	0.058
	302359	4 inch	1-1/8" Tubing	0.058	0.058
	302360	4 inch	1-1/4" Tubing	0.083	0.065
	302361	4 inch	1/2" Pipe	Schedule 40
	302362	4 inch	3/4" Pipe	Schedule 40
	302264	5 inch	3/4" Tubing
	302265	5 inch	7/8" Tubing
	302266	5 inch	1" Tubing	0.058	0.058
	302267	5 inch	1-1/8"	0.058	0.058
	302268	5 inch	1-1/4" Tubing	0.058	0.058
	302297	5 inch	1/2" Pipe	Schedule 40
	302269	5 inch	3/4" Pipe	Schedule 40
	302258	6 inch	1-3/8" Tubing	0.058	0.058
	302260	6 inch	1-1/2" Tubing	0.083	0.058
	302261	6 inch	1-5/8" Tubing	0.083	0.058
	302262	6 inch	1-3/4" Tubing	0.095	0.083
	302259	6 inch	1" Pipe	Schedule 40
	302263	6 inch	1-1/4" Pipe	Schedule 40
	302374	6 inch	1-1/2" Pipe	Schedule 40
	302253	7 inch	1-1/2" Tubing	0.058	0.058
	302254	7 inch	1-5/8" Tubing	0.058	0.058
	302256	7 inch	1-3/4" Tubing	0.095	0.083
	302375	*7 inch*	2" Tubing*	*0.085*	*0.095*
	320055	7 inch	1-1/4" Pipe	Schedule 40
	302257	7 inch	1-1/2" Pipe	Schedule 40
	302356	6 inch	Flat Die Set	Up to 1-1/2"Wide
	*302355*	*5 inch*	3/4"-1"-1-1/4" Square Set*

			* The 2" Tubing and Square	** The 2" die will bend up
			*Dies Sets are optional and*	to .134 wall chromoly, d.o.m.,
			*must be ordered separately.*	or electric weld.

Tube Bender - Hydraulic Vertical

Tube Bender -
Hydraulic Vertical